CrOtALiTo
July 07, 2008, 09:46 AM
Precaution: The Informative Note wrote below of this post is only character educative, then I don't have responsibility for the bad use of this software.:pelota:
Hi, Today, I'll write a section about, How you could recover files that for X or Y you loss them.
Is normal that a computer, in occacions has problems in his system, manly our hardisk has high forms of damage, and for that adversity, our files will be loss.
There are a lot of software about of this thread, but some programs aren't easy in his use.
Then, How you could recover your loss files.?:thinking:
I'm Engineer Informatic, and Always I have that types of problems in my work, I use a program called:
GetDataback
This software could help you, when you for failure of the Operative System, or your hardisk loss table partition, the software does your will recover your information most valuable, I have used this program and really it gave me good output in my work.:thumbsup:
Point follow
You must donwload this program for his use, and you can to give me the program, and I'll be glad in send you.
When you have the program is necesary that you turn off or disconnect some hardisk additional so you can avoid damages future in your other hardisk.
There are a lot of handbooks in the website above this software, you shall donwload some handbooks of the website, where the hanbook explain you the correct use of the software.
Open you the program you might find the steps follow.
System Operation. Steps
Scan for drivers, Push the ''Next'' buttonto start searching for accesible drives. You can uncheck one or moree drivers if you want to ommit them. This might be neccessary if a complete scan causes your computer to crash. Check accessibility..
FDO- HARDISK
FD1- HARDISK
HD128- HARDISK
ECT...
Next step.
The program find hardisk installed in your computer. later it will show other steps follow as, choose the source you want to perform the data recovery on. For best results select the entire physical drive, e. g,''2nd hard drive (Show you some hard drive installed computer on).
Available drives:
Physical drivers
1st hard drive (Volume), 2st ( this in case you have only a hard drive or two or more devices installed in computer on). Please avoid, should you put attention for avoid damage on other devices.
Next step
Select range and file system (Select the range to scan and the file system you want to recover)
Example 2st hardisk the program show you three options, ( Search entire drive, search partial drive, file system to recover it show NFTS, or some time show you FAT too). Please Next.
Next step.
The program start to find over the files saved in your computer this process is common that you have to wait al lest 5 to 24 hours is slow the process of scan. But you don't worry the software does will help you.
I hope that help you, my note some day, and you have some doubt about the program please, let me know and, I'll be glad in help you.:)
I await your corrections.
Have a good week.
Hi, Today, I'll write a section about, How you could recover files that for X or Y you loss them.
Is normal that a computer, in occacions has problems in his system, manly our hardisk has high forms of damage, and for that adversity, our files will be loss.
There are a lot of software about of this thread, but some programs aren't easy in his use.
Then, How you could recover your loss files.?:thinking:
I'm Engineer Informatic, and Always I have that types of problems in my work, I use a program called:
GetDataback
This software could help you, when you for failure of the Operative System, or your hardisk loss table partition, the software does your will recover your information most valuable, I have used this program and really it gave me good output in my work.:thumbsup:
Point follow
You must donwload this program for his use, and you can to give me the program, and I'll be glad in send you.
When you have the program is necesary that you turn off or disconnect some hardisk additional so you can avoid damages future in your other hardisk.
There are a lot of handbooks in the website above this software, you shall donwload some handbooks of the website, where the hanbook explain you the correct use of the software.
Open you the program you might find the steps follow.
System Operation. Steps
Scan for drivers, Push the ''Next'' buttonto start searching for accesible drives. You can uncheck one or moree drivers if you want to ommit them. This might be neccessary if a complete scan causes your computer to crash. Check accessibility..
FDO- HARDISK
FD1- HARDISK
HD128- HARDISK
ECT...
Next step.
The program find hardisk installed in your computer. later it will show other steps follow as, choose the source you want to perform the data recovery on. For best results select the entire physical drive, e. g,''2nd hard drive (Show you some hard drive installed computer on).
Available drives:
Physical drivers
1st hard drive (Volume), 2st ( this in case you have only a hard drive or two or more devices installed in computer on). Please avoid, should you put attention for avoid damage on other devices.
Next step
Select range and file system (Select the range to scan and the file system you want to recover)
Example 2st hardisk the program show you three options, ( Search entire drive, search partial drive, file system to recover it show NFTS, or some time show you FAT too). Please Next.
Next step.
The program start to find over the files saved in your computer this process is common that you have to wait al lest 5 to 24 hours is slow the process of scan. But you don't worry the software does will help you.
I hope that help you, my note some day, and you have some doubt about the program please, let me know and, I'll be glad in help you.:)
I await your corrections.
Have a good week.